Search results

I’ve been doing some research and I found a pretty informative video about the oiling system of turbos. In there it says that one contributing factor to finding oil in either the intake or exhaust side of your turbo is excessive engine blow by or, if you have a larger turbo (they specifically...

While I had the intake piping off, I checked for shaft play on the impeller shaft and did not feel any. As far as turbo seals, what would cause those to fail (besides a dirty intake filter)? I ran the filter that came with the kit for about 50k miles. I then switched to the Donaldson B085011...

I’ve had the MPD budget 364.5 kit with full piping and CCV kit on my truck now for 100k miles. I did a boost leak test on the truck as it felt like it wasn’t running as well as it did when I initially installed the kit. Well, when I pulled the intake piping off the turbo inlet I found what I...

When Ford was having issues with their oil filters for the 6.7 I started using the Donaldson P502503 oil filters. They have a better micron eating than stock and also have a silicone ADBV. I found them 3-pack for $49 on Amazon. They’re all I use still to this day. All the specs here...

My ABS module (machined aluminum block) appears to be leaking brake fluid. So pouring out of it but after a one hour drive to work I can see it starting to run down the spring perch onto my 3-link arms. It looks like it’s coming from one of the two hard line fittings on top of the module. Is...

I’ve got 330k on the clock and she’s paid off so I’m looking to shoot for the 1k HP mark. Now, I know this is a lofty goal but I’d like to reach as close too (or over) it as I can. What engine internals and transmission work needs to be done to keep it from spitting a rod or toasting the trans...

Has anyone had this experience? Installed a Fabtech drop pitman arm along with a Ready Lift track bar drop bracket this weekend and when I try to turn full left or right the pitman arm hits the track bar bracket. I’ve already verified that I have the correct part #s and made absolutely sure...

Who makes a reliable WVO conversion kit for the 6.7?

I need steering wheel wiring diagrams for 2013 F250 Lariat and 2017 Lariat no heat, no adaptive steering. Please. Thank you.

Airbag HC3Z-25043B13-AA Clock Spring HC3Z-14A664-A Shipped to 76088

How big of a variance from command pressure vs actual pressure would affect performance? Couple hundred psi or 1k psi or more? Also, what do I need to monitor on the trans for what is causing 3rd to 4th shift flare?

I have it on my truck. It won’t eliminate drips if routed to atmosphere. I have mine ran to a filtered catch can mounted to my frame. I drain that once a week. I’d say 10-15 drops of oil maybe.

What should my rail psi be? What is the max for a ‘13?

So I have the MPD 64.5 kit with full piping, tuning by NL. When I try to give it full throttle it initially feels like it’s making good power and then it feels like there’s a stall. Almost as if I was letting off the throttle a bit. As soon as it shifts to the next gear it feels like it’s...

I’ve been running T6 in my 6.7 for almost 300k miles and no problems so far.

Will the hpfp fit a 2013? Also, what is the max hp it will support?

Has anyone had to deal with this? We had a cold snap a few weeks ago and ever since then when I come out first thing in the morning and start the truck, it leaks for 1-2 mins then stops. I’ve bought the four gaskets it calls for but can’t find the procedure for R/R. I know the oil pan has to...

Does anyone have the wiring diagram for the rear heated seats? I had to clean up a spill so I took out the seats and now none of the heated seats in the rear work. All of the connectors are the same profile and they’re a PITA to get to. I’d like to know what plug goes to where so I only have...

Does anyone have anymore input on using Forscan to reset the transmission adaptive system?

Does anyone have any experience with any Industrial Injection CP4 pumps or is Exergy the gold standard?