Reply to thread

Message: [QUOTE="mgeistman, post: 336873, member: 6877"] well if he put the same size 90's on the back of the heads as the front, and still has the same issue i would say he needs a larger reg. or maybe one after each head, or a reg. after the pump/before the heads. the reg. he is using doesnt read pressure on the return side, it reads pressure on the inlet the reg. so i dont think the size of return would play a factor in this bc pressure in between the back of the heads and the reg. is working properly, that being said it pretty much narrows it down to the banjos have a pressure drop across them, meaning there acting as a non adjustible regulator, and keeping the regulator he has now from doing its job completly. [/QUOTE]

Verification

Random media

Hydroboost and power steering

DSCN8402

Kazakhstan

psd3

CB antenna mount / step to underhood area

IMAG0795_1_

2005_Excursion_with_20_wheels

Latest posts

Fuel sending unit and wheel studs
- Latest: Powerstroke Cowboy
- 34 minutes ago
7.3 Tech & FAQ
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 7:47 PM
6.4 Aftermarket
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket

Members online

No members online now.

Total: 922 (members: 0, guests: 922)

Top