155 Injectors, go stock nozzles or bigger?

[weekendwarriorfsw32]

Well my injectors in my 6.0 are toast and I want to just go a little bit bigger to 155's. What nozzles to you guys suggest to get, stock or something a little bigger? This is for my 04 X, Has a Powermax but some day I want to try out a madturbo stage 1 or 2. It has all the other normal mods. What Hp would 155's put me near?

 

[weekendwarriorfsw32]

Well I guess I got my question answered by Fullforce. Now to figure out if I want to go with 155's or 175's, I can always upgrade my injectors later to if I want form Fullforce.

 

[mattman347]

175's and have it tuned accordingly! :evil

 

[weekendwarriorfsw32]

Not trying to blow this thing up! Already blew the head gaskets twice so now I am O-ringing the heads.

 

[SSpeeDEMONSS]

Properly done, ARPs and stock HGs should hold way more than you are aiming for.

Garrett

probably getting paid at work to post this from my bionic

 

[SICKS LITER]

go with a 75% nozzle, youll like it.

 

[Pizza pig]

155s? Stick with the stock nozzle, no need to go any bigger. That setup is very fun


Helen Keller sent this?

 

[strokin6L]

i would do nothing smaller than a 50% on a 155 injector. If your not gonna put bigger nozzles on the 155's...i see no real need for even getting bigger injectors then. Just my .02. I've talked to a handefull of guys that have 155/50's and a powermax and they are absolutly happy with their setup and have said that the truck tows awesome with managable egt's.

 

[Mdub707]

Doesn't the powermax you currently have already outflow a stage 1 MTW? Probably more comparable to the stage 2... can't see giving up the powermax for that I don't think...

155/50's would be my vote. Though from your posts it sounds like just putting in new stockers may be the better bet!?

 

[TooMuch03]

Personally, I like 30% nozzles with 155s. If you throw a little extra fuel at the powermax, you should have a really fun truck. IMO, there is no reason to switch from the powermax to an MTW stage 1. You will not see any hp gain at all. A better upgrade would be MTW's billet wheel for the pmax, if it proves itself. i would bet that setup puts you around 500 rwhp

 

[6.0 p-stroke]

155s and a stock turbo, tons of fun on the street! Good clean power without sacrificing towing abilities. As far as nozzle size, I can't help you out there lol.

 

[weekendwarriorfsw32]

Thanks guys going with 155's with stock nozzles on my powermax for right now. Later if I want I can up grade them to 175's or 190's, just need it to run good for right now.

 

[6.0 p-stroke]

Let me know how that powermax does with that combo. I'm about to switch back to my 155s in my crewcab and can't decide between an 03 turbo or powermax. I've heard they can be a little laggy for their size.