Reply to thread

Message: [QUOTE="markfuga, post: 1404688, member: 10964"] So after completing the sheet metal work for the firewall, the front bumper was a gift :D Fitting the 78 bumper to the 96 frame was as simple as cutting the first six inches of the 78 frame and turning those pieces into brackets to hold the bumper. The brackets bolt to the inside of the 96 frame and are the PERFECT width to align with the holes in the bumper. Couldn't be easier! The 78 frame starts to widen soon after the tips of the frame so I had to cut at an angle along the frame to avoid the widening and add some 1/4" plate to extend the brackets. I also cut about 2 inches off the 96 frame to allow everything to align properly. [/QUOTE]

Verification

Random media

Ford ranger danger

Underside_31

clean

0192

DAY_TWO_1_

P1020153

!sicpsd

avatar1021_1

17_3

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

DEEZUZ

Total: 732 (members: 1, guests: 731)

Top