Reply to thread

Message: [QUOTE="jrex2506, post: 1562601, member: 12845"] I have a 2004 manual, was running fine, shut the truck off, the next day it wont start. The icp and ipr readings look good, batteries were charged, ficm reading was good but swapped it woth a good ficm as well. I replaced the crank and cam semsors just to be sure. It will not sync on my scangauge. I tested the ohms on the wires, and i am getting a rpm reading while cranking. I actually pulled the harness off to check any chaffing issues, but even moving the harness around, i could still not get sync. Im not sure what to check next. I do have an 05 that is also a manual, but not sure if i could swap the pcm just to see if that is the problem. Any ideas? Sent from my SM-S134DL using Tapatalk [/QUOTE]

Verification

Random media

side-1

puller

577

IMG_20111001_135247

458385_10150803517661300_517021299_9998956_891941742_o

led_tail_5

Excursion

2012-10-09_16-57-03_441

IMG_20140422_185351_603

2012-10-13_18-10-24_385

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Patrick Feeley

Total: 860 (members: 1, guests: 859)

Top