Reply to thread

Message: [QUOTE="FrankTheTank, post: 167554, member: 3401"] [B]some more pics........ i threw a few stitch welds in the hangers, just because, really didnt need to but i just feel better that way if the bolts some loose or.... what ever i dont know. just wanted to [/B] [ATTACH=full]72781[/ATTACH] [ATTACH=full]72782[/ATTACH] [B]got my shock mounts in where they needed to be. dont know if you can see it but i had to put a slight twist in the hanger to match the angle of the OBS shocks. The SD shocks are straight up and down while the obs have an outwerd angle to them [/B] [ATTACH=full]72783[/ATTACH] [B]welded the shock mount in because the alignment pins no longer will work and i just wanted to make sure they stay where they are and dont spin. just did a bunch of small stitch welds back and forth so i didnt overheat anything and kept goin till it was all filled in looks ugly but it will hold [/B] [ATTACH=full]72784[/ATTACH] [B]this was the sensor that gave me my problems. all good now. FYI the SD sensor will not work haha it has to be a sensor out of the stock rear [/B] [ATTACH=full]72785[/ATTACH] [B]now im ready to drive up to my buddies house. should of got a pic but i was in a hurry. i put the reciver back on and put my rolling chassis on a trailer behind it. the chassis had my obs rear on it and i had the SD rear on mine and towed it up the road like that. hahaha [/B] [ATTACH=full]72786[/ATTACH] [B]its inits new home to start on the front end. got to say i LOVE the 3.73 and the brakes are unreal now that i have disks in the rear. couldnt get into it too much becaue the wasnt any weight on the rear to keep her form sliding out alteast once i took the trailer off[/B] [ATTACH=full]72787[/ATTACH] [/QUOTE]