Reply to thread

Message: [QUOTE="dseitler, post: 1203832, member: 14112"] Not a problem. Cut 1-1/8" out of the pipe and welded back together and now we have a perfect fit. I was able to make several test runs over the weekend and never had any problems with the hoses or connections coming off even at peek boost at 53lbs. [ATTACH=full]151028[/ATTACH] [ATTACH=full]151029[/ATTACH] Everything has come together and I think we are finished with this setup. Could not be happier with the results of the 367FMW. Ended up with 12.6 1/4 with 671HP in Craig's Race tune. My daily driver Tune settings are 615/627/643 HP and the mileage is not bad. I have seen over 17 @ 70mph on a trip if I drive very conservative on flat ground in FL. I tow quite a bit with a trailer that weighs more than 17,000lbs. Tows real well and is very clean. Next step will be the 69mm Turbo if it comes out. Until then I will work on my 60ft times and tire pressures with the 420's to see if we can do better. Possible a OUO 4 link to stop the dancing at the line. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

ABE23F30-8C40-41F1-A971-D15A7F7BD978

front_axle_swap2

New Bumper

0028

silver_truck_pass_side_bmf

IMG_20111009_185528

pics

7.3 XLT CREW CAB 4X4

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- 16 minutes ago
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Today at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Today at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Today at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

Total: 754 (members: 3, guests: 751)

Top