Reply to thread

Message: [QUOTE="ford rules, post: 1025204, member: 8274"] So I was checking things over today on my new setup. I replaced the hot side cac boots and noticed I had a very small amount of oil on the inside of the comp housing. There was no oil at the inlet or outlet of the intercooler. So I pulled the intake off and there is no oil in the intake, I thought maybe it was sucking oil out of the air filter. Also pulled the DP and didn't see any oil residue there either. So I then checked for end play and for in/out slop and it had a little bit of in/out play. I thinking the thrust beating is already going out of it. What would cause this to happen so fast? The trucks only been running the setup about a month. And also how worried should I be, I don't wanna have the thing gernade and risk sending **** through the motor. [/QUOTE]

Verification

Random media

capped

Mishimoto 6.4 radiator

rear_axle_8_

20160811_223430

no_limit_receipt_3025_100-page-001

pulsewidthnumbers

20190316_183601

919123_367663446688562_990954678_o

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Today at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

Daves06

Total: 1,193 (members: 1, guests: 1,192)

Top