Reply to thread

Message: [QUOTE="psduser1, post: 1167722, member: 735"] Did your kit come with a bulkhead fitting? I'm assuming so. When I did mine, I just pulled the sending unit, and drilled an appropriate size hole between the stock connections, measured the depth of the tank, and cut the pickup tube about 3/16" short. Topside, I went to an npt fitting, and pushloc fitting. Sorry I don't the any pics. I used the 5/16 for the return, with a compression x pushloc fitting, and crushed and rolled the 3/8" nipple off tight. Just keeps the dirt out, and can't be seen, lol. [/QUOTE]

Verification

Random media

1511MG-1011

DIESEL_POWER_Readers_Diesels_March_2012

Always changing to make it a home on the road.

F350SRW2

The rear

1936

Duallys

interior

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 11:41 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,248 (members: 0, guests: 1,248)

Top