Reply to thread

Message: [QUOTE="valvetick, post: 1352751, member: 15315"] Get a edge to monitor or some type of monitor. Check your deltas, hpop holding pressure, fuel pressure, ficm voltage, and tear it apart and throw in studs and oem gaskets. Being a 06 throw in the updated stc fitting when doing studs and stand pipes. Check injectors make sure all o rings are good so no high pressure oil leaks or stiction. Also while you have it apart check to see if it has the larger upgraded turbo drain tube the 06 can have either depending on build date. Throw on a regulated return if you run a race tune or a blue spring update kit if your holding fuel pressure and just want to be safe. Ditch your plastic cold side intercooler pipe before it cracks with heat and age. I have a heavy toy hauler so I threw in a snow plow fan clutch and wired it to the up fitter switch so I can lock up the fan before hitting a big hill never see temps over 215* with it locked in before rather then letting the computer lock it after it gets hot. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

RACK

018_3_

BA76C1D8-B7E9-4311-839C-3B4D50557AE1

118010A_1

Stack

1511MG-98

.300WM

diamond eye exhaust 5

13_leveled_rite_aid

176

girdle

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

Total: 1,203 (members: 3, guests: 1,200)

Top