Reply to thread

Message: [QUOTE="Got4wd, post: 1207677, member: 1698"] Parts needed 99-03 e250-350-450 7.3 Power steering bracket You can use the 6.0 f350 pump like I did if you want to the reservoir like I did in the pics or you can use the factory E series but will need to mount the reservoir up more by the ac compressor. I didn't have that room since i have a intercooler. You need the E series pulley also. It had a smaller shaft diameter than the F series 94.5-97 Power steering hose. This will need to be made. It's easy, however if you are running hydroboost, do not use the aeroquip stainless hose. It will transfer the noise from the pump to the cab. With a vac system there will be no noise. I am going back to rubber hose so the noise can't transfer up to the cab from the all metal lines. I also used Lee mfg conversion fittings so I got rid of the ghetto Teflon seal and now have -6 hoses. On to the pics. Sorry for the quick write up. Post up if you have any questions. I do have a few more brackets made if you want to do this conversion and use the E series power steering reservoir. I will sell them for what they cost me. [ATTACH=full]151387[/ATTACH] [/QUOTE]

Verification

Random media

IMAG0075

ms3

TS2

!sicpsd

95_Bronco_conversion_pics_004

IMG_20160905_185326723_HDR

My 2011 F250 Lariat

Rear touch ups comin

09 6.4

30ea3c13

for sale

ARP head studs

Latest posts

Best turbo upgrade in current times?
- Latest: young7.3
- Today at 11:11 AM
7.3 Aftermarket
Tuning the 7.3 in current times
- Latest: 6.0 Tech
- Today at 10:24 AM
7.3 Aftermarket
I
6.0 fan on OBS Results....
- Latest: INFRNL
- Today at 2:51 AM
94-97 Aftermarket
2000 f350 dually lariat
- Latest: ju015dd
- Yesterday at 1:17 PM
7.3 Aftermarket
I
A better 7.3 cam sensor!
- Latest: INFRNL
- Yesterday at 6:54 AM
7.3 Tech

Members online

Total: 1,303 (members: 2, guests: 1,301)

Top