Reply to thread

Message: [QUOTE="Black AOD, post: 1538796, member: 16536"] Got the Tater Built Drop-In Turbo and Exergy 10mm Pump swap done this past Saturday. Went very well, zero issues. Had it all done in about 5 hours, big thanks to my buddy Travis for helping me out on this. New turbo and pump definitely make a very big difference. The stock turbo is largely restricted on airflow compared to the modified drop ins and the new exergy pump flows quite a bit more fuel, it fuels very very hard. It is currently on a 2200us tune, I will probably run a lower fueling tune for every day driving so that it doesn't smoke so much in the lower RPMs before the turbo lights. Other than the fueling, it runs very very well and the driveability is 10x better than before. I 100% fully believe it spools faster than stock. The turbine whistle is also quite incredible now. The whole truck sounds completely different. My 3-4 shift flare was quite pissy at first at the added power but it is all already learning and is doing much better already. I still think a mildy built trans is in my future for next year most likely. It would definitely help with this setup. [ATTACH=full]178038[/ATTACH][ATTACH=full]178039[/ATTACH][ATTACH=full]178040[/ATTACH][ATTACH=full]178041[/ATTACH] Sent from my SM-N975U using Tapatalk [/QUOTE]

Verification

Random media

ex_short_block

Frog_bs

20170409_211834

1_imagejpeg_21

Absolute Performance 6468 and Piping Kit

DSCF0878

phone_2017_224

20181202_092432

led_tail_4

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 359 (members: 0, guests: 359)

Top