Reply to thread

Message: [QUOTE="a_moore, post: 1551054, member: 807"] New HPFP from Industrial Inj, New lpfp and filters always changes regular. The pump was rattling badly and had to be close to letting go. Replaced it and the lp. Noise gone and seems to run better. Had surging pressures and you could hear the pump load and unload. Those are now corrected. Issue is; take off from a start...first fine, shift to second and it will stall at 2k rpm. When this is happening the rail pressure drops to 750-1,000psi. Then all of a sudden. It will snap out of it and run normal. After this hiccup all others gears normal. Can drive a full tank of fuel at 85moh with no issue between 4th and 5th gears. I took this video idling at fuel stop today. [url]https://youtu.be/LmBetuAkDDg[/url] Pressure surging from 3k-6.5k and loping a little. What am I missing? [/QUOTE]

Verification

Random media

12971_10151329061588434_873694369_n

IMG_20161130_080743835

eleanor_part_two_13_1

10_8_2011_HPP_taken_by_Mark_Skalny

20150605_141253

Mini Maxx

2005 6.0

RACK_4_

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

Latest posts

S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Today at 10:27 AM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ

Members online

DEEZUZ

Total: 817 (members: 1, guests: 816)

Top