Reply to thread

Message: [QUOTE="jrex2506, post: 1486312, member: 12845"] im running this with 1/2 lines and connected to the fuel bowl like shown above. my is holding steady at 70 psi with 190/75% on a full warren race tune. I like to do a lot of custom stuff but as asked above, I would just buy the bracket and be money ahead. the pump slides and locks in place so no moving and then you just drill your holes. I installed mine behind transfer case. there is a nice place to install there and just removed my stock pump. I have the upgraded spring too. I also just have a summit fuel pump hook kit and don't have the $50 plug but I need to apply something to protect the wires from water. I had about 400 in the whole thing; sump, wiring kit, pump, bracket and lines. [/QUOTE]

Verification

Random media

Always changing to make it a home on the road.

SprintPhoto_ecprys

531

Texas6.0

03 7.3 ZF6

truck19

Minotaur Parameters

DSC01107-1

2005_Excursion_with_20_wheels

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 814 (members: 1, guests: 813)

Top