Reply to thread

Message: [QUOTE="Arisley, post: 1272258, member: 67"] I grew up with an old West Bend milling machine that my grandpa got from the Navy off a WWII boat. We used to do all of our own machine work, it was fun. Don't have one anymore. Had to pay a machine shop 400 bucks to repair two heads for my little Durango. That sucked. Been there and done that. My driveway is downhill. First time I pull the trans, my truck was parked in the driveway nose down. Jacked the truck up, blocked it really, really good. Strapped the trans jack to the trans. Attached a come along from the jack to the trailer hitch. Unbolted every thing, pulled it back with the come along. Swapped the TC and flexplate. Put it back in place with the come along. Only time working on a hill has worked in my favor. I have a friend with a shop with a concrete floor now. He has a lift, but it just grunts when it tries to pick up my truck. Growing up, we didn't have a lift, but we did have a pit with concrete walls and floor. It sucked when the sump pump died. [/QUOTE]

Verification

Random media

IMG_4726_1_

BB3C04D5-BB5B-4F75-9207-BBD824089A43_11

5A766E13-0921-447D-BF37-F7B873D5B2BE

22CFE362-8FC2-4A49-B36A-F2F44645DDFE

5C3T-18C815-CB RADIO

my first diesel and first truck, project white out

phone_pics_015

Capone

My 6.0 excursion

O&G's 2011 F250 Journey

my first diesel and first truck, project white out

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

KBMKVIII

Total: 809 (members: 1, guests: 808)

Top