Reply to thread

Message: [QUOTE="KCTurbos, post: 1311299, member: 13852"] Food for thought.... bigger turbos do make big torque numbers but they are usually much later in the RPM band. You will usually start to make 1000tq past 3000rpms instead of down low at 2500rpms You make big HP late in the RPM band, like past 3500rpms. So a lot of guys end up disapointed with a 600hp setup when they realize that they never spend any time above 3500rpms and when they do they just spin their tires. They also start to notice that you moved peak tq from the 2400-2600rpm range to the 2800-3100 rpms range... because it actually makes the truck feel slower Basically you are in the area where you need to decide if you want a peppy truck off the line that runs clean... or a 600hp monster that makes WOT useless on the streets under 50mph I would suggest 190/30 and KC stage 2.5... that should put you in the 550-590hp range on fuel only and run very clean. It will make 1000tq and do it sooner in the rpm band than a 68mm. All while still having great towing abilities and great spool up. We can get you a great package deal and get you set up with injector/turbo combo discounts. Send us an email if you want a quote [email]kcturbosinc@gmail.com[/email] [/QUOTE]

Verification

Random media

Pic upload test

2011

tapatalk_1311611039050

DSCF0878

IMAG0084

rear_axle_5_

20161122_112113

Custom Audio Build (extended cab 6.4L)

20131228_212437

phone_pics_093

Latest posts

M
oil bypass
- Latest: missfire unload
- Yesterday at 9:19 PM
7.3 Tech & FAQ
A few turbo questions and a rant
- Latest: ju015dd
- Yesterday at 8:06 AM
7.3 Aftermarket
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Monday at 8:52 AM
7.3 Tech
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain

Members online

Derkperk

Total: 1,233 (members: 1, guests: 1,232)

Top