Reply to thread

Message: [QUOTE="co04cobra, post: 1288100, member: 666"] They are all basically the same, but there are some slight differences. Things that are easy to modify. We usually splice in a small piece of the 7.3 firewall where the PCM goes through because the 6.0 wiring harness changed how it enters the cab. 02 harness has a hole in the floorboard to the left of the drivers seat where the harness goes through. They did away with the hole for the gas trucks throttle cable in 05. Small things like that. We also usually put the 7.3 heater core over in the 6.0 box because the heater hoses are a different diameter. Some of these changes also vary between cab configs. [/QUOTE]

Verification

Random media

trips_completed

thumb_IMG_1333_1024

587

17_2_1_

n553693078_1262234_9994

header wrap to protect the airbag

CNG Setup

53ef043e8a18a800e36f89691862863e_zpsadb42fc0

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 673 (members: 0, guests: 673)

Top