Reply to thread

Message: [QUOTE="Dmueller, post: 1558494, member: 34322"] I originally posted this on the wrong thread, so I'm sorry if you're seeing this twice. So, I've been looking and looking for a 99-03 7.3 SCREW cab to replace the rusted out one on my 01. After reading a lot of different things all over the interwebs, I'm a little confused. My thinking right now is that I could definitely use the 07 cab that I found, along with the 07 dash so long as I use all of the wiring harnesses from the 01, but I will have to swap the plug for the headlight switch, and maybe have to patch a piece into the firewall where the PCM passes through. Otherwise, everything should bolt up and transfer easily. Is my thinking on track or have I missed something? The cab I found has a decent interior, so that would be a decent 6 year upgrade. I also found an 02 cab, but would have to transfer my interior over. I just need to make a decision. Thanks for any input [/QUOTE]

Verification

Random media

eleanor_wiring_6_

20160526_164056

he451ve compressor 64mm inducer

Old and new STC fitting

101431-I-like-it-a-lot-gif-Dumb-and-D-XKuE

67_Coolant_Tank

05 ccsb 250 king ranch

phone_2017_608

photo_3_1

My 2000 F250 7.3L

My 96 stroker

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

DEEZUZ

Total: 459 (members: 1, guests: 458)

Top