Reply to thread

Message: [QUOTE="Dzchey21, post: 1206607, member: 63"] Some more little things check off the list this weekend Power windows are working. They will just need wired up once I get the harness in the doors. I used a set of regulators from a 1990 ford bronco that I had laying around and modified them. Wasn't too bad first one took me 3 hours the next took me less than 30 minutes. I cut a hole in the door for the keyless entry pad on the drivers side. All vehicles need these even if they are old lol. Dash is almost ready to be permanently mounted just need a few more things and then I can dissassemble everything and undercoat and clear coat. I ordered a new door seals and window seals for the entire truck as well as a smooth one peice back glass. I also ordered a power door lock kit for these truck specifically and I'll make an attempt to wire them into the 04 harness so the key fob and door key pad work. [ATTACH=full]151257[/ATTACH] [/QUOTE]

Verification

Random media

New_Image

1511MG-165

20151116_172104

2012-04-10_16-52-28_50

RImsss

New Headlights

5362B81D-69BA-4093-903D-726FA0910C54

03 7.3 ZF6

sick leaker smoke trail

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 1,205 (members: 0, guests: 1,205)

Top