Reply to thread

Message: [QUOTE="onebadcoastie, post: 970143, member: 5543"] Are you certain the air is in the fuel bowl and not somewhere else along the neck going to the manifold? I know Olly pressure tests his manifolds so it most likely isn't coming from there. Also, if you run it and then pull the cap, does fuel stay in the bowl or is it draining out? Also, air will get purged through the injectors. as longs as there's adequate fuel pressure, the air in the rail shouldn't be a big deal. I mean if you consider air floats on fuel. The rails fill up from back to front since the motor sits like 5* downward. The air should hypothetically make its way to the front of the head but like I said, it will get purged through the injector and shouldn't be catastrophic. Have you felt around for air in the area? [/QUOTE]

Verification

Random media

2015-04-11_19_42_15

Window switch

Lit

New set of gpz's

6_4gate_004

before plasti dip spray

ford

05 lights

IMG_20120223_155950

IMG_20161130_080821591

CFD_Junk

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Yesterday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Yesterday at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

No members online now.

Total: 579 (members: 0, guests: 579)

Top