Reply to thread

Message: [QUOTE="Big Bore, post: 149264, member: 760"] No, the AD pump failed. The tech said trash must have clogged up the pump and burned up the motor. It didn't. The pump and internal of the filter head was pristine. The gerotor parts were spotless. He also mentioned water in the fuel. So wtf good is a filtration system with a water separator then if it burns up the pump motor before it ever gets to the filter. Thats right, the pump is not protected by the filters on an AD. Yes that is retarded. I'm still trying to get larger pics up. Yes that is carbon that fell out of the rotor and stator. The brushes were fine, the bearings are tight. The motor simply burned up. With less than 30K, probably less than 20K. It finally took out my Walbro. I replaced the Walbro with another Walbro, and after taking the AD off the Walbro is completely silent. Prior to that it whined loudly at key on just before startup. I'll keep working on the pics. There are a couple threads in tech forum with the details. [/QUOTE]

Verification

Random media

my obs 7.3

Truck pics.

IMG_20140329_233137_520

Special preping cleaning soap.

New Tires

truck2

She's getting old

2011-05-11_16_49_02

169815_1660981239184_1076760051_1781960_6725912_o

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Yesterday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Yesterday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Yesterday at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

Total: 671 (members: 2, guests: 669)

Top