Reply to thread

Message: [QUOTE="KCTurbos, post: 1378453, member: 13852"] When you buy the SCT pro-racer software they give you a "base file" but it is not very good. You are essentially starting from scratch. SCT tuning for the 6.0 is "piss poor" at best. There is no boost table and no Pulse width table which is what most guys would use to tune the trucks. With no Pulse width table it makes it really hard to get your timing correct (timing is usually based off of RPMS vs Pulse Width). So with no PW table you are taking a huge shot in the dark for your timing table. You have to do a lot of "guess and check" manipulation to other tables to get the results you want. I think this is one of the reasons that custom tuning is so big in the 6.0 market is because it takes a lot of time to get a "good" tune dialed in. As nighthawk said... there is a HUGE learning curve when it comes to tuning on these trucks. [/QUOTE]

Random media

interior

20181202_092432

Front End

photo_21

MBRP DP

superduty_poster_pic_4

IMAG0391

P1000851

My 1997 F-250

Latest posts

A few turbo questions and a rant
- Latest: ju015dd
- Today at 8:06 AM
7.3 Aftermarket
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Monday at 8:52 AM
7.3 Tech
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Saturday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

Julixtu

Total: 1,282 (members: 1, guests: 1,281)

Top