Reply to thread

Message: [QUOTE="ja_cain, post: 1163834, member: 11928"] This is the info that James gave me last April when I inquired about the 364.5FMW vs the BASB. "Hey, That bell turbo is nothing more than an out of the box S366 with a name other than S366. I would highly suggest the S364.5FMW. Flow of a cast 66 with the spool of a cast 63mm. Flow rating is 79lbs per min. 1lb per min behind the S366. Uses the 68mm turbine wheel, and should be used with a 1.00 t4 housing or larger. You can always mod the turbo to a Billet 66mm down the road if you would like, but I can assure you, you will be plenty satisfied with the S364.5FMW. Spool up is about as fast as stock." [/QUOTE]

Random media

All Cleaned up

eleanor_dash_2_

user123603_pic33586_1373077410

rear_axle_4_

dual_pumps1

IMAG0574

04 6.0

front set-up

983C27CB-9ADA-4E33-B2DF-80CBFF8A98BF

Latest posts

A few turbo questions and a rant
- Latest: ju015dd
- Today at 8:06 AM
7.3 Aftermarket
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Monday at 8:52 AM
7.3 Tech
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Saturday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

No members online now.

Total: 1,264 (members: 2, guests: 1,262)

Top