Reply to thread

Message: [QUOTE="KCTurbos, post: 911178, member: 13852"] Here are a few pics of the extreme studs that I took. At first with a quick glance they looked exactly like arp's... but the more I looked at it the more I realized they are different. You could in fact verify if you have extreme studs currently in the truck just by looking at the top. Here is the overall view of the H13 extreme studs [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153435_227_zps2a9f5cb4.jpg[/IMG] Here you can see Extreme studs left and ARPs on the right. They look kinda similar [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153615_207_zpsa1021026.jpg[/IMG] Here you can see Extreme studs left and ARPs on the right. You can actually see that the h13 extreme studs are slightly thicker just past the threads [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153643_099_zps915add45.jpg[/IMG] Here is the measurement of the extreme studs 14.28mm [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153804_749_zpsa76fa262.jpg[/IMG] Here is the mesurement of the arp studs 13.37 (that makes the h13 about 1mm thicker) [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153823_646_zpsbe636bfd.jpg[/IMG] Extreme stud on the left with a socket end, ARP on the right with allen [IMG]http://i280.photobucket.com/albums/kk170/chstfish/IMG_20140207_153624_402_zps07362467.jpg[/IMG] So overall I liked the extreme stud option. I am not sure if thicker means better because the threads are still the same. Also even though the washer/nut seem to look the same they are in fact different sizes (I found that out the hard way late at night and ended up not having the right socket). To me the looks mean basically nothing... it will all come down to how they perform [/QUOTE]