Bed rust repair parts

[Smokin 6.0]

Trying to fix this stupid wheelwell rust on my 02. The rest of the bed is just fine but the wheelwells not so much. Looking for patch panels that will do the WHOLE wheelwells in on piece. I haven't been able to find any but i was told they are out there. Any help would be great

 

[ToMang07]

Google "Super Duty Bedside" and whatever length bed you have.

 

[ToMang07]

https://www.autobodyspecialt.com/cgi-bin/commerce.cgi?preadd=action&key=F-SD147-LH

https://www.autobodyspecialt.com/cgi-bin/commerce.cgi?preadd=action&key=F-SD147-RH

 

[dsberman94]

That's not the whole thing. Just the upper half of it.

 

[ToMang07]

http://www.partsgeek.com/gbproducts...acuLO1kjBwAujD_tu5uq3ALZsPkzRLHTE8aAlKV8P8HAQ

http://www.partsgeek.com/gbproducts...7fiHdlcQspAzT94ppeVkaAC7j18oTYbJ6caAvMg8P8HAQ

 

[Smokin 6.0]

That's the whole bed side. I'm talking the whole wheelwells from the bottom to the top its kinda like the patch panels just one piece and not the while wheelwell

 

[TyCorr]

You can buy the whole skin (complete visible exterior bed side), the upper area of the wheelwell, or the bottom belt line down pieces on either side of the wheelwell.

A piece that would replace everything around just the wheelwell is pointless. Youd be cutting a foot off each side of a full skin. People either repair the upper corner of the rear wheelwells where the infamous rust bubble starts on every superduty or reskin the box.

 

[Smokin 6.0]

Is there any places selling bedsides cheaper than $350 each

 

[TyCorr]

I highly doubt it....should be 4-600

 

[Smokin 6.0]

I can get a whole new bed for $800-$1000 around here

 

[njjeep]

Only thing wrong with a new bed is the wheel wells are a different design then the 99-10 beds


Sent from my iPhone using Tapatalk

 

[Smokin 6.0]

No I mean I can pick up a bed off a junkyard truck 99-10 for $800-$1000 around here

 

[Zaairman]

It is cheaper to get new used bed than it is to fix your existing bed.

 

[ToMang07]

That's your best bet anyway...new bed.

Sent from the pocket porn device.

 

[rosspulliam]

I'm in the middle of fixing these rust spots at the moment. With a, shrinker/stretcher fabbing the necessary filler pieces has been a snap! These wheel wells don't have much shape to them at all.