Reply to thread

Message: [QUOTE="obspsd, post: 438534, member: 3691"] Ok here is a checklist, and feel free to add anything i might forget. I start by pulling the radiator and both batteries, also the Intercooler pipes if you have them Passenger side: Unhook heater lines from motor Unhook wires from starter relay Unhook hose to map sensor Unhook the engine to cab ground Disconnect a/c line to condenser Driver side: Disconnect a/c line to condenser Unbolt a/c lines from compressor Unplug main engine harness Unbolt brake master cylinder Disconnect steering shaft There's a wiring harness under the brake booster that runs thru the firewall that has to be disconnected also.its the 3rd one over from the driver fender. Also there's a ground on the core support infront of the battery that needs to be taken off Under the truck: Unplug both plugs on the Trans and the one plug from the transfer case Disconnect the shift linkage Take out the 4wd shifter Disconnect parking brake Now you should be ready to unbolt the 4 body bolts in the cab and the 2 on the core support and lift the cab. Also whatever gauges, fuel system, etc you have may require some unhooking also. I believe i got most of it, feel free to add to the list [/QUOTE]

Verification

Random media

sept_29_10_1691

photo_1_2

59205_109685675757241_100001474272705_73141_6765346_n

t4i-t6_001

2012 f250 sagging

untitled103

SAM_00981

qu7a7a3y

20121011_224510

cleaning_axles_1_

gate_020

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,053 (members: 0, guests: 1,053)

Top