Reply to thread

Message: [QUOTE="6.4psd916, post: 675306, member: 2653"] The turbo feed tube is easy enough pull out I always do, then its out of your way. With the kink, I would replace it. From my efforts is swapping turbos, the up-pipes need to be unbolted, I did not see any way around it. I don't think there is enough wiggle room to get it all back together. Unbolting the up pipes is no fun the first time. The two in the bottom middle are the worst, but a 3/8 drive flex head ratchet with a 3" extension and 6 point 10mm deep socket. [/QUOTE]

Verification

Random media

Camo Feller 1

Rear

20161122_112103

step_15

Memorial_11_045

IMAG0724

Picture_1207

2012-04-06_12-35-26_374

QA_800

Picture_170

Picture_780

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 456 (members: 2, guests: 454)

Top