Reply to thread

Message: [QUOTE="imelmo, post: 584871, member: 110"] On my regular cab there are 6 cab bolts. The two in the engine bay are near where the radiator goes and were 18mm on my truck. You'll need a deep well. Then there are 4 inside the cab. The front ones are under the mat/carpet on the angled part of the floorboard. Just pull the mat/carpet back and pull out the rubber access plug. The rear ones are behind the seat just under the mat/carpet and have no access plug. You will see the bolt heads when you pull the mat/carpet back. For whatever reason, the interior driver's side bolts are 24mm while the interior passenger side ones are 21mm. You will need a deep well or extensions for the front ones as they are recessed in the floor pan. . [/QUOTE]

Verification

Random media

2013-03-09_15-42-52_372

IMG_20150328_153726746_HDR

my old 6.0

Weight Reduction,one part at a time

Moto

2011-11-01_18-34-41_290

Stock TDE1 Timing

step_7

Latest posts

F-250 & F-350 gear ratio question ?
- Latest: 6.0 Tech
- Yesterday at 10:46 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 574 (members: 0, guests: 574)

Top