Reply to thread

Message: [QUOTE="bpan, post: 1406853, member: 17463"] They don't look the prettiest but they sure get the job done. [ATTACH=full]166980[/ATTACH] The rear bracket, I got a welding shop to weld these onto the factory cast block. [ATTACH=full]166981[/ATTACH] The front brackets, I needed to put these on the side of the frame rail due to my aftermarket fuel tank hanging below the frame rail. I would do a design that welded to the bottom of the frame, and the axle tube next time if the fuel tank is not there. I worked with what I had. [ATTACH=full]166982[/ATTACH] [ATTACH=full]166983[/ATTACH] And yes, I used tractor top links. I come from a farming family and a farming town, I am well aware of what these can and cannot handle. I have a friend running the same setup sled pulling with a 750hp Duramax. EDIT: Not to sound like an ass, I just know there will be someone that will comment on that, bashing them. [/QUOTE]

Verification

Random media

IMAG1026

FullSizeRender1

New Headlights 2

IMG_20130401_210424_710

eleanor_part_two_27_

IMAG1039

995183_4879811973548_183146646_n

eleanor_part_two_59_

Hydroboost and power steering

Latest posts

Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Today at 7:47 PM
6.4 Aftermarket
Fuel sending unit and wheel studs
- Latest: psduser1
- Today at 7:36 PM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Yesterday at 10:39 PM
6.7 Tech
DEF in the fuel tank of 2013 F250 6.7
- Latest: Crazy Canuck
- Monday at 12:05 PM
6.7 Tech
I
Tuning the 7.3 in current times
- Latest: INFRNL
- Monday at 9:28 AM
7.3 Aftermarket

Members online

Total: 689 (members: 4, guests: 685)

Top