Reply to thread

Message: [QUOTE="INFRNL, post: 641456, member: 9835"] In the past, I have had good luck with an air chisel. It is definitely easier if you heat the rivet with a torch till they are glowing, but it can be done without the torch. I definitely would not recommend using a drill like some have, seems like more work than necessary. I have also cut the rivets flush(sawzall) and tapped them out with an air chisel. It works even better when you have a good compressor and chisel. This is just my experience. [/QUOTE]

Verification

Random media

g351

Step Lights

1511MG-97

My 2011 F250 Lariat

Truck

IMG_20140102_123229

Truck_2008

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 8:00 PM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

No members online now.

Total: 1,112 (members: 0, guests: 1,112)

Top