CTS 2 monitor rail pressure/alarm

[BIG JUICE]

Hey guys I am unsure if it's possible or capable. But is there a way to get cts2 to alarm when rail pressure is low under wot or even 90 percent or more throttle. I could set it to alarm but when driving normal it would alarm then too. I am sure you guys know rail pressure is all over depending on load.

I ain't worried about clearing the rail pressure when I am driving normal, obviously. But driving like an azz I would prefer an alarm if pressure comes down without watching it like a hawk and trying to focus on watching the road.

You guys know if that is possible or capable?

 

[bigrpowr]

Hey guys I am unsure if it's possible or capable. But is there a way to get cts2 to alarm when rail pressure is low under wot or even 90 percent or more throttle. I could set it to alarm but when driving normal it would alarm then too. I am sure you guys know rail pressure is all over depending on load.

I ain't worried about clearing the rail pressure when I am driving normal, obviously. But driving like an azz I would prefer an alarm if pressure comes down without watching it like a hawk and trying to focus on watching the road.

You guys know if that is possible or capable?

i would focus more on running a tune that doesnt drain rail below 28xxx .

 

[BIG JUICE]

Lol. Uh sir are you recommending I upgrade my tuning?

 

[bigrpowr]

Lol. Uh sir are you recommending I upgrade my tuning?

i am saying IF you are running a tune that is draining rail, either the tuning is calling for too much PW or your pump is weak .

 

[BIG JUICE]

Ok, I figured you were recommending the new tuner for 15s on the forum lol

 

[Jacob @ No Limit]

You'll get a reduced power chime and cel on your dash if you drain it too much.. Old tunes at the track proved that for me.