Reply to thread

Message: [QUOTE="mandkole, post: 1080356, member: 4630"] IMO, 212F is not enough. IIRC the OE hose is 400F. Heat soak on underhood plumbing is rough on hoses and our application can run the oil at 200+ for hours at a time. Heat aging is time accumulative. All time spent over the max temp limit (added up) ages the tube. Will it fail tomorrow? No, but the original properties of the material are quickly being broken down. Most hoses are put in the catalog with a 'temp range' based on the material package used, but not all 300F hoses are equal. To get a hose tube to meet the SAE J1405 hot oil circulation test for 1000+ hours takes considerable effort and very premium cross-linked poly ethelene (CPE) materials. Many CPEs and nitrile blend wont get it done. [/QUOTE]

Verification

Random media

13_icon_lift_1

01212_fHodBcmgerg_600x450

IMG_20111108_101802

Hydroboost and power steering

C1968A89-7E21-41BB-9F01-CAF44C987D88

16348E9E-3122-44E3-BB24-B6E4EAEF2F51

20170409_180211

27D166B1-8983-4693-B824-92E6A4913538

KMC XD Series 797 (the other part of the wheel)

Latest posts

I
7.3 LPOP Problem
- Latest: INFRNL
- Yesterday at 4:04 PM
7.3 Tech
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Friday at 7:22 PM
7.3 Tech
J
6.4 spartan
- Latest: jmathews90
- Friday at 6:16 PM
6.4 Performance
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Friday at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Friday at 1:00 AM
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,150 (members: 0, guests: 1,150)

Top