Reply to thread

Message: [QUOTE="Cutting-Edge Diesel, post: 685651, member: 5039"] Lol yup. Other motor had up graded springs and stock push rods. Haveing stock push rods wasn't the problem here the problem was a broken rocker casing the intake push rod to pop out. (notice no valve contact for intake side) this is why after the first pass there was a slight miss a idle. Now the 3rd pass I decided to spray it because I wasn't going to win down a cylinder. Had the gate blocked off. I'm thinking a combination of the intake valves not opening and the high back pressure caused the exhaust valves to hit and bend the exhaust side and causing the harder miss after the nitrous pass. Other pistons have a slight contact pattern where the exhaust valves were hitting. But the rest of the push rods are fine. So my theory is the broken rocker caused it all. But who knows. [/QUOTE]

Verification

Random media

8638

web_banner_468

uploadfromtaptalk1320025322225

dual_pumps4

My beautiful wife and my build

1511MG-160

IMG_20111108_121916

230668_168302186562256_100001474272705_421438_4036334_n

IMAG0806

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 11:41 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

Derkperk

Total: 1,244 (members: 1, guests: 1,243)

Top