Reply to thread

Message: [QUOTE="VegasFMF, post: 1514806, member: 21138"] Im running Rotella T4 15-40. I changed the oil last night, I drained it into a large commercial kitchen cone oil filter to see if there was any debris in it. This piece of paper towel came out. [ATTACH=full]175816[/ATTACH] I checked the pressure relief valve on the oil filter housing and it was fully closed. I hooked up the gauge to the filter housing and took it for a drive, pressure seemed normal going up with rpm holding good pressure still running the same. I hooked the gauge back up to the HPOP reservoir and the pressure was doing the same thing before I changed the oil, dropping with rpm and not going over 35 psi. Im thinking I may have left some paper towel in a oil port while I was working on it. I was using paper towels to close off the ports so no debris would get into them. [/QUOTE]

Verification

Random media

Planting

Snapchat-20140606065945

20140901_171915

2 generations of Ford guys

Old grille

Screen_Shot_2015-10-06_at_11_43_19_PM

2011-07-23_13-19-32_1

Elite WG

Picture_175

99.5 7.3

PMF track bar, overall

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 393 (members: 0, guests: 393)

Top