Reply to thread

Message: [QUOTE="JDub, post: 306966, member: 206"] Just buy the EAS pressure kit(part number 98607), you could use one 0-100 for fuel pressure and a second 0-100 for back pressure. You'll need the EAS sensor input kit (#98605). You will also need to switch over to the expandable EGT probe if you don't already have it (#98603) Very cool system though, they will all just piggyback together under the hood, then just one wire into the cab to the monitor. Once you plug them in and turn the CTS on, you'll then need to remove the CTS and plug it into your computer to setup those new sensors. They'll come up as 'Universal A' and 'Universal B'. With their software, you can relabel them to whatever you want, 'Fuel' and 'Drive' etc...you can also setup warnings, etc... We've set a couple trucks up with that system, Edge has done a nice job. We've even added a temp sensor in the I/C pipe to watch compressor discharge temps, see how efficient the compressor wheels we've been testing are. [/QUOTE]

Verification

Random media

train_wreck

PSA_flexfit

photo_1_1

Sticker

95_Bronco_conversion_pics_010

2016 F250!

befor an after

7D68CB75-0F2F-42FA-B435-909EEFC06FB1

30845_1455121825659_3857946_n

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 11:41 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Yesterday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Yesterday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US
Ford 7.3 Passenger Bank Dead
- Latest: Powerstroke Cowboy
- Monday at 8:20 PM
7.3 Tech

Members online

No members online now.

Total: 1,307 (members: 0, guests: 1,307)

Top