egr block off plates

[Cory S]

i am looking at running Innovative tunes i wont really run the higher hp tunes. i am curious with the block off plates can i remove the coolers with just block off plates?

if i do go with the wastegate kit can it be done cab on?

 

[Jeff@Spartan]

No. You must have coolant plugs to delete the EGR coolers. You also don't have to get a wastegate kit to delete the coolers. You can run just a plain EGR cooler delete and be perfectly fine.

 

[Cory S]

what you think about this one?
http://cobbsdieselperformance.com/i...stroke-basicegr-delete-kit-w-o-wastegate.html

 

[Cory S]

No. You must have coolant plugs to delete the EGR coolers. You also don't have to get a wastegate kit to delete the coolers. You can run just a plain EGR cooler delete and be perfectly fine.

awesome will i have problems running no wastegate

 

[Jeff@Spartan]

awesome will i have problems running no wastegate

Unless you add fuel (bigger nozzles, bigger HPFP) or plan on running nitrous, no.

 

[Jhaddox]

Do not order from Cobbs...you'll be lucky to see the product in 3 years

 

[Cory S]

Unless you add fuel (bigger nozzles, bigger HPFP) or plan on running nitrous, no.

dont ever plan onany of that do i need to do an intake elbow?

Do not order from Cobbs...you'll be lucky to see the product in 3 years

yea im looking at this kit
http://www.elitedieselengineering.com/product/14550007/EGR-Cooler-Delete-Kit/

 

[Jeff@Spartan]

I recommend doing an intake elbow and a CAC pipe. I really like this setup:

http://www.elitedieselengineering.com/product/14240010/No-Limit-IC-Pipes/

It's pricey, but look what you are getting. The design is great and it will work with any EGR cooler delete. Not to mention it will look amazing under the hood of the truck.

 

[Cory S]

I recommend doing an intake elbow and a CAC pipe. I really like this setup:

http://www.elitedieselengineering.com/product/14240010/No-Limit-IC-Pipes/

It's pricey, but look what you are getting. The design is great and it will work with any EGR cooler delete. Not to mention it will look amazing under the hood of the truck.

yea i was just looking at that kit what about this one? i know its notas good as elite. but again this is just a work/dd truck it will never see a dyno or track.

and does spartan have any package deals? tuner/ex/intake?

http://performancemachinemfg.com/i-...-high-flow-intake-elbow-intercooler-pipe.html

 

[jdgleason]

I recommend doing an intake elbow and a CAC pipe. I really like this setup:

http://www.elitedieselengineering.com/product/14240010/No-Limit-IC-Pipes/

It's pricey, but look what you are getting. The design is great and it will work with any EGR cooler delete. Not to mention it will look amazing under the hood of the truck.

:whs:

yea i was just looking at that kit what about this one? i know its notas good as elite. but again this is just a work/dd truck it will never see a dyno or track.

and does spartan have any package deals? tuner/ex/intake?

http://performancemachinemfg.com/i-...-high-flow-intake-elbow-intercooler-pipe.html

I hear what youre saying. If you look at the differences in those intake elbows, its pretty clear that the no limits elbow will allow much better flow which means cooler temps. That is huge, especially for a work truck.

Also, Spartan has killer deals right now....

http://powerstrokearmy.com/forums/showthread.php?t=8721

 

[Jeff@Spartan]

and does spartan have any package deals? tuner/ex/intake?

http://powerstrokearmy.com/forums/showthread.php?t=8721

http://www.spartandieseltech.com/

 

[Dustball8504]

Are the two plates identical in a delete kit?