Reply to thread

Message: [QUOTE="Tiha, post: 1563368, member: 33189"] Ok finally started this project. Good news and more questions. First the obligatory cp4 check. All is well. I am disappointed in laptop and forscan. I can't do more that what I could with Bluetooth and phone. At least as far as troubleshooting information I need for this project. Expected to have an injector bypassing too much fuel. Nope. No return flow. Even engine running. None. Now I have cylinder contribution numbers. Truck warmed up. One set at idle, one set at 1500 rpm. Pic taken after about a minute so flow adjustments could stabilize. So what am I looking at? To me that says like 4 injectors but really #5 is all over the place.[ATTACH type="full"]187007[/ATTACH][ATTACH type="full"]187008[/ATTACH][ATTACH type="full"]187009[/ATTACH][ATTACH type="full"]187010[/ATTACH][ATTACH type="full"]187011[/ATTACH] [/QUOTE]

Random media

CF365ECC-4E81-4D8A-BED8-B526B9B722D6

1997 ZF5 DRW

photo_42

user123603_pic33586_1373077410

step_13

thumb_IMG_1333_1024

photo_7_3

2011-04-12_18-12-29_117

2012-05-05_12-02-33_380

gare_jbj

Latest posts

A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 8:00 PM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Saturday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

No members online now.

Total: 1,276 (members: 0, guests: 1,276)

Top