Reply to thread

Message: [QUOTE="6.0 Tech, post: 1564061, member: 23001"] So, first off, the timing is not correct. You are 180 degrees off from how you had originally set the timing. The pump is in the same visual spot, but possibly incorrect inside. Turn the motor over to where you originally set the timing, remove the gear, turn the motor over to where it is now, and then reinstall the gear. Once again, I am not sure this is your problem, as I have never installed one incorrectly. However, it is not right, so do it right. If that fixes it, great, if not, then continue with diag. Another thing, how long has this thing run since you have done the work? It may still have air in it. But fix the ****ing pump timing before anything else, it will take 5 damn minutes for it to be correct instead of hmmming and hawing about what could be the issue. There is something not right, for sure, 100%, fix that and then retest. Shit, pulling the gear off, you don’t even have to crack the system at all… Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

IMG_20111107_130616

IMG_20171027_182316575_HDR

2012-10-31_18-15-34_882

rear seat

2012-04-24_18-45-52_6

2013-02-05_12-21-15_655

sept_29_10_170

6_7IC_Dyno_Logan

121

step_12-2

Latest posts

S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Today at 10:27 AM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ

Members online

No members online now.

Total: 859 (members: 0, guests: 859)

Top