First Boosted Launch with new setup

[Extended Power]

...different HP turbo again, and running the BD diverter valve.

I didn't know how fast or hard I could load it up without snuffing out the turbo, so I took it slow...and boosted pretty soft too.

http://www.youtube.com/watch?v=Y2j5QCmo8uw

 

[Extended Power]

Here is one in 2wd...

http://www.youtube.com/watch?v=n4310xng318

 

[kyle43335]

Here is one in 2wd...

http://www.youtube.com/watch?v=n4310xng318

the second video is private.

 

[Extended Power]

Should be ok now....I changed it.

 

[kyle43335]

Should be ok now....I changed it.

nice. around 100mph?

 

[kevin]

Looks good Ivan! You should try and make it to the billings race. Im hoping to go

 

[BlueWaffle]

looks like a runner!

 

[Extended Power]

nice. around 100mph?

Yes...both are around here somewhere.

This is with Eric's Extreme X tune.
Egt's are still hot, even with less drive pressure now.

May need to rethink the situation...Looking into a T4 and up pipes...we will see.

I got a lot of possibilities with the exhaust housings, and Diverter valve parts I have now...might just throw on a open T3 .70 housing, and gate it...or a divided .70.....and gate it...don't know.:shrug:

Waiting on a reply from Eric too, to see what he suggests.

 

[Extended Power]

Looks good Ivan! You should try and make it to the billings race. Im hoping to go

We have races this weekend, but really, I don't care what it runs. I care more about the day to day driving...you know, melt the tires off while merging into traffic type stuff.

 

[mclean]

We have races this weekend, but really, I don't care what it runs. I care more about the day to day driving...you know, melt the tires off while merging into traffic type stuff.

If this was facebook I would like this comment haha. Love doing that

 

[07_powerstroke]

I need a setup like this! How much money does it take just in parts to build a compound setup?

 

[Ad8 PRODIGY]

Gauge whore oke:

Runs good! All the steering in the 2wd video was to correct for the rear end walking?

 

[kevin]

Gauge whore oke:

Runs good! All the steering in the 2wd video was to correct for the rear end walking?

Nope super curvy road

 

[FX4 F2-Fifty]

Nope super curvy road

Just a bunch of slack in the steering.

Glad to see the truck coming around! Looks great!

Sent from my DROID BIONIC using Tapatalk 2

 

[Extended Power]

yeah, I really like the Detroit Tru Trac...it works very nice.

...uhm...yeah...the road suddenly started slipping away...not sure why...

 

[Extended Power]

I need a setup like this! How much money does it take just in parts to build a compound setup?

Really tough to say...but if your gonna do your own piping and welding...the most expensive parts are the turbos...

That's just for the twins though...hopefully you already have the supporting modifications like injectors, fuel system, HPOP, gauges, transmission, etc.

It's just time consuming...finding the time to work on it, and actually get anything done is tough.

 

[Extended Power]

Noticed my high pressure oil dropped off a little bit under wot, so I changed the drive pulley, and went for another scoot. (gotta like a steady camera)

Still too hot...more responsive, but too hot yet.

Pulling the 66 off, and going back to my 63/68, but gonna put the .80 housing on it.

Got a line on a T4 x .83 divided housing for the 68mm exhaust wheel, so I better get busy swapping turbos again.

 

[Pizza pig]

hoping that t4 works for you, I think the 68 wheel is holding you back, need mo flo

 

[Extended Power]

hoping that t4 works for you, I think the 68 wheel is holding you back, need mo flo

Well, the video was with a billet wheeled 66/73/.80, so if it was gonna flow, it should have flowed with that wheel.
The increase in compressor wheel size may have diminished any gain though...

Gonna try the .80 housing on the 68 wheel...if that don't work, I will look at the T4 housing again.

...or run the 68mm exhaust wheel with the .80A/R and add a external gate.

...or run the 68mm exhaust wheel with the .70A/R and add a external gate.

 

[BlueWaffle]

at least you have options! i'm looking forward to seeing how the t4 .83 is going to work on my HP...