Reply to thread

Message: [QUOTE="6.0 Tech, post: 1567787, member: 23001"] In theory a buzz would indicate that it’s working. However there is something that buzzes during the test that is not the injectors. I’ve had one bank unplugged unknowingly and the buzz sounded ok, not great, but it threw the bank 1 hi to low failure code. 2.9 ohms is high if you’re homing just the harness, can’t remember the injector coil side spec to tell you if that’s good thru the injector coil side or not. But you could have a failed splice somewhere that isn’t sending power to the injectors. If the whole bank is dead, it’s either a valve cover gasket connection, be it internal or external, a single failed injector killing the bank, or wiring. Most likely with wiring would be the power, as it’s a common power, and idm ground controlled for actuation. The chance of having 4 bad wires is much less than 1 bad wire. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

bigger_97_f250

0041

MPD 6.7 Ford Budget Kit box 2

The Truck

QA_800

IMG_20110626_1931281

20170502_212351

2013-03-29_11-53-34_365

New_wheels1

0023

eleanor_part_two_77_

dieselx2

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 569 (members: 1, guests: 568)

Top