Reply to thread

Message: [QUOTE="NotStock, post: 511551, member: 862"] No problem. Here are a few installed pics, these had some custom powdercoating/engraving done. The normal kit comes with a machined alum hub as photographed with the kit layed out. Everything is machined here in the US from solid billet. We use Timken or Yukon bearings, Warn lockout hubs, 35 splined 4130 stub shafts. The biggest advantage with our kit is the bearing spacing is farther apart than any one else but our hubs dont stick out like some of the kits. Dyna Trac's kit is lower profile than ours by about 1" though. Our 99-04 hubs stick out 7" from the disk brake mounting surface to the furthest edge of the lockout. To my knowledge Dyna's kit is 6"ish but Im not certain. We havent finalized the design for the '05+ kits but we are going for a 6" or less with the bearings still spaced out like they are. Our kits cost $1650 for non ABS and $1750 for ABS models. [ATTACH=full]99582[/ATTACH] [ATTACH=full]99583[/ATTACH] [ATTACH=full]99584[/ATTACH] [ATTACH=full]99585[/ATTACH] [ATTACH=full]99586[/ATTACH] [ATTACH=full]99587[/ATTACH] [/QUOTE]

Verification

Random media

High Pressure Oil Leak Problem

2011-07-06_22-25-01_636

IMG_20110626_1931281

SSBC Brakes

phone_pics_043

My 2011 F250 Lariat

Doin It Daily Style...

1997 Dually

011

2011-07-28_17-24-25_31

JD's whip

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 409 (members: 0, guests: 409)

Top