Reply to thread

Message: [QUOTE="Dieselboy., post: 125983, member: 1232"] This is how I mounted mine. I took the old 7.3 trans cooler and drilled the rivets on the large mounts and turned it upside down, and mounted it up top and will run the lines by the air intake side. No more Zoo-dad mod LOL. I did have to cut a bit of the header panel to clear the cooler. I also had to modify one A/C condenser mount by cutting off a bit of the excess to allow the cooler to sit high enough to use an existing hole to mount. I will just use a compression fitting or even a hose clamp with 3/8s hose and a pushlok adpater to go up to my 1/2" back to the tank. [img]http://img36.imageshack.us/img36/7213/73psd048.jpg[/img] [img]http://img43.imageshack.us/img43/9388/73psd047.jpg[/img] [img]http://img856.imageshack.us/img856/2230/73psd046.jpg[/img] [img]http://img256.imageshack.us/img256/6589/73psd049.jpg[/img] [img]http://img40.imageshack.us/img40/8408/73psd050.jpg[/img] Im gonna button here up this weekend. [/QUOTE]

Verification

Random media

2012-08-03_12-39-07_231

shiny

superduty_poster_pic_3

F30B2F7D-C859-45F3-83D2-E27129023E60

a92d678a

my first diesel and first truck, project white out

Morimoto D2S 5.0 Projectors

lawn mower repair service!

5C3T-18C815-CB RADIO

F-4E_Refueling

Edge_CTS2

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 690 (members: 0, guests: 690)

Top