Reply to thread

Message: [QUOTE="TARM, post: 332683, member: 578"] I like to use 3/8 to the motor but you could use smaller. I just like to stay with 6 an(3/8) on top the engine. If you need some hose I likely have plenty to make a couple hoses out of I can send you along with end fittings. With all the different setups I have built I have ended up with a decent collection. I would think 4' would be enough for the two hoses. It all depends how you route things. My front ones as the reg is right on top of the HPOP res are only 6"-8" each LOL As I came up the rear the backs join the Y down at the frame rail behind the front tire so the passenger side is a good bit longer than the driver side. [/QUOTE]

Verification

Random media

Big_R_Radio_Gospel_Channel

Hydroboost and power steering

2013-01-01_16-29-19_242

plati3

Screenshots 2

sept_29_10_172

sctlivewireTS

IMAG0534

F9F85977-5C8A-4607-8BC2-D92052886746

caboff1

colorado_dyno

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

Powerstroke Racer

Total: 463 (members: 1, guests: 462)

Top