Reply to thread

Message: [QUOTE="Marty, post: 89083, member: 602"] I got a msg about this thread, I didn't read through the whole thing but figured I'd throw this out there. I use a 5 prong 30A Relay on my Dual pump setups. There are 2 outputs and I run a 10ga fused link from the battery to the relay. Then I run 2 14ga wires back to the pumps from there. I use the factory wiring to trigger the relay. If anyone has any questions for me or my setup PM me as I very rarely have time to get on and check responses to each of my posts. Andy... I use an old AIH relay to trigger my A1000 as well as other Key on devices (eventually an air pump and other things). I do not use the factory wires to trigger my relay because I had a short and I never fixed it. Something I suppose I will get around to, but never seem to have time for my own truck anymore. It's got a list a week long of stuff I need to do to it. :( [/QUOTE]

Verification

Random media

20121012_163537

H&S 6.7 delete kit

my truck!

motor

100_2108

photo_8_1

Close up

phone_2017_580

eleanor_part_two_78_

Real Trucjs

Latest posts

A few turbo questions and a rant
- Latest: powerlifter405
- Today at 12:08 AM
7.3 Aftermarket
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Yesterday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Yesterday at 2:44 PM
Aftermarket Performance
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket

Members online

Derkperk

Total: 1,223 (members: 1, guests: 1,222)

Top