Reply to thread

Message: [QUOTE="IdahoF350, post: 1106936, member: 2989"] Ok, so the Harpoon mod is done to the spare tank. That's not as easy as it's made out to be if you are a bigger guy with big hands and long arms, getting the cutter on the tubes in a position to be able to squeeze them is a bitch. I underestimated that one a bit. The '05 sender assembly appears functionally identical to one that has had the Hutch mod, just a closer return point with a rubber nipple check valve on it, so I'm going to run it unless it happens that the line sizes are different. Been thinking about the screens in the mixer and if they were worth anything from a filtering standpoint, they'd plug up all the time, and guys would be bitching about them regularly. It's more likely they are there to break up any air bubbles from the return line. So the pre-pump filter, while fine in principle, is going to be WAY more than anything in that mixer is capable of. It only concerns me that putting a pre-filter in front of the pump may put an unnecessary load on the pump, cause cavitation, and increase the load on the pump, reducing the output and shortening it's life. I'm looking forward to doing this as my Friday project. I'll let everyone know if I run into any snags or if it goes smoothly. Sent by my right thumb! [/QUOTE]

Verification

Random media

IMAG0308

road trip (pit stop)

triples

IMG_20130626_094224_226

37639_1380292674996_1462297010_30993191_7998455_n

Smokyred

MG_6989

eleanor_part_two_66_

2013-01-15_11-15-54_733

13615140_1359443464083558_3787105765199931527_n

20140325_095107

dads_truck_044

Latest posts

J
6.4 spartan
- Latest: jmathews90
- 3 minutes ago
6.4 Performance
N
Ford 7.3 Passenger Bank Dead
- Latest: NitroJoe
- Today at 11:47 AM
7.3 Tech
Show & Go/Going to Try this Out combo Build
- Latest: Powerstroke Cowboy
- Today at 9:06 AM
6.4 Aftermarket
Y
Fuel sending unit and wheel studs
- Latest: Yojih123
- Today at 1:00 AM
7.3 Tech & FAQ
Truck slipping into 4th
- Latest: ju015dd
- Wednesday at 10:39 PM
6.7 Tech

Members online

jmathews90

Total: 735 (members: 1, guests: 734)

Top