Reply to thread

Message: [QUOTE="Tree Trimmer, post: 1160812, member: 716"] i do that with every tire i get, regardless of brand. it's mainly cuz to do a true static balance, they would put weights on both the inside and the outside of the rim. i wont let weights on the outside of my rim, and just on the inside isn't balanced enough. you can still feel at interstate speeds. you can't use straight equal with sensors. the powder clogs the hole of them and you have to replace them, you can't dig it out and/or otherwise salvage the sensor. the beads are designed for work with sensors. for you shotgun guys, there about the size of 7 1/2 shot, give or take. iirc a half a bag of beads is like 6oz. ish and as long as you dont have idiot tire guys, and you remember to tell them, you can move the beads from old set of tires to new set of tires. the beads in this set of tires i have, are the second set of tires these particular beads have been in. [/QUOTE]

Random media

photo_14

8 inch rough country

ICP

DSCF1085

My 2011 F250 Lariat

Six.4

Latest posts

Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Yesterday at 8:52 AM
7.3 Tech
A few turbo questions and a rant
- Latest: Tiha
- Yesterday at 8:22 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Saturday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

bismic

Total: 1,368 (members: 2, guests: 1,366)

Top