Reply to thread

Message: [QUOTE="mandkole, post: 1182443, member: 4630"] Assume the compression is good? Have you done any datalogging? My questions are only continuation of the conversation -- Id definitely agree that even a rough motor should have your boost into the 40s. You appear to have enough fuel. Is your intake a 5"? I made a capped ABS joint for a 4" tester but it should be easy enough for 5" also. As you are testing for air leaks, the boost gauge will show pressure also. I'd shoot for a 6-7 psi differential of the 30psi regulated air supply to the boost gauge--this would be 23-24psi on the boost gauge. Some leakage is expected but if you have much more than that, there is major leakage somewhere. [/QUOTE]

Verification

Random media

Planting

elbow_2

caboff1

OEM_Cooler

FB_IMG_15249195915951

550191_3653020851761_1742536775_n

C1968A89-7E21-41BB-9F01-CAF44C987D88

maple_grove_031

F5C3B40A-49B9-4D3F-A171-8E4E8ED2C13A

Latest posts

A few turbo questions and a rant
- Latest: ju015dd
- 53 minutes ago
7.3 Aftermarket
Ford 7.3 Passenger Bank Dead
- Latest: 6.0 Tech
- Monday at 8:52 AM
7.3 Tech
Georgia Roll Call
- Latest: RascalMafia
- Sunday at 2:52 PM
Southeast US
Stage 2 LPFS for a 6.0 Powerstroke
- Latest: powerlifter405
- Friday at 11:58 PM
Engine and Drivetrain
0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Friday at 2:44 PM
Aftermarket Performance

Members online

Total: 1,365 (members: 5, guests: 1,360)

Top