Help Deciding Which Offset

[RazorSVT]

Hey guys I've been trolling for a few years but first time posting hoping some of you have a similar setup and can give me some insight.

(Winter setup 305/55/20 Duratracs on Plasti-dipped oem rims)

2014 F350 Platinum, Procomp 2 1/2" leveling kit and 14" Gatorback kickback flaps.

I just picked up a set of 325/60/20 Duratracs and Bushwacker extenda-fender flares match painted.

I'm either ordering either Fuel Nutz 20x9" rims or 20x9" BMF NovaKanes. The big question is what offset I should go with for no rubbing since these Duratracs are beyond beefy.

 

[josh@thedieselcartel]

0mm offset in those wheels would be best.

If you need pricing on both wheels let me know and I can get you setup. You can email me [email protected]

 

[RazorSVT]

0mm offset in those wheels would be best.

If you need pricing on both wheels let me know and I can get you setup. You can email me [email protected]

Thanks Josh the levelling kit documents are suggesting 0mm too so that's what I'll order. I"m in Alberta, Canada so I'm just ordering locally.

 

[sootie]

0 offset wont be even with your flares, it will look funny imo.

why not step up to a 20 x 10?

 

[RazorSVT]

0 offset wont be even with your flares, it will look funny imo.

why not step up to a 20 x 10?

I was told by a few shops a 20x10 with those tires will rub no matter which offset with only my levelling kit so that's why the 20x9s. I'm going to put them on to see how it looks... If I like the look I won't bother putting the flares on and will sell them.

 

[DSL_PWR]

A 20x9 with a 0 offset will stick out about 1.5" further than stock wheels.

 

[RazorSVT]

Thanks for the input fellas. Just made the order for the BMF Novakanes 20x9" 0 offset in death metal. I'll be mounting & installing next week so will post some pics without the flares and see how it looks.

 

[kmotsko]

Any update on this? With only a 2.5" lift and those wheels...running the flares they have to rub if u put flaps on....

 

[RazorSVT]

It took a little bit of trimming and kickback mud flaps but all fits great with no rubbing ever.

Here it is all done: http://powerstrokearmy.com/forums/showthread.php?t=63063

 

[kmotsko]

My mind is blown right now...there is no way I can fit a mudflap up front without rubbing. And that's only 35x12.5 toyo at's.

 

[RazorSVT]

My mind is blown right now...there is no way I can fit a mudflap up front without rubbing. And that's only 35x12.5 toyo at's.

Ya had to trim a tiny bit of the Bottom corner of fender. Prime/paint where you made the cut to prevent rust then put on the flares.

 

[kmotsko]

Mine would run on the flare (that I have trimmed) before the fender I'll try to get some pix and figure out how to upload them

 

[kmotsko]

Not much room

 

[kmotsko]

No room for mudflap...maybe I need the under cool spacer and a 3 link...then the full leafs and air bags to level it back out. I have 22x11 that I run in the summer would be really really nice if those fit too with flaps lol