Reply to thread

Message: [QUOTE="6.0 Tech, post: 1342304, member: 23001"] I have had this happen several times, and honestly have had absolutely no luck drilling them out because they are so small. It tends to break the ez out when you attempt extraction. If you have some sticking up, possibly try welding a nut to the part of the bolt that is sticking up, if you have access to one. But i cant remember if they are magnetic or not so check that first. As far as moving it you should be ok to move it short distances. I have seen one in the shop that had the block off plate leaking, and he drove for a while, and it burned a hole thru the intake. I dont know about the bonding compounds. That area sees the most amount of heat, so it would have to be something that could withstand 1500+ to survive there. There will be as much pressure as there is ebp, so for overkill sake lets call it 60-75psi. [/QUOTE]

Verification

Random media

DSCF6272

Custom Audio Build (extended cab 6.4L)

IMG_20111001_135329

donor_harness_2_

SRT8_interior3

smokeshow

ngauge_front

Elite WG

IMG_20170924_182920_2

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Yesterday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current

Members online

Bogdankap

Total: 1,214 (members: 1, guests: 1,213)

Top