Reply to thread

Message: [QUOTE="pedaltheglobe, post: 1258799, member: 15509"] My 06 F350 King Ranch had two 4 inch blocks stacked in the rear with the stock blocks removed when I purchased it. It had a 3 inch spacer along with aftermarket coils in the front. I am unsure of how much lift the aftermarket coils have. Picture of how it currently sits attached. Shortly after purchasing it I swapped in a 5 inch block in the rear and removed the two 4 inch blocks on each side. I also removed the 3 inch spacer in the front. It now sits level so I'm assuming I effectively have a 4.5 inch lift, but someone correct me if I'm wrong... My goal is to drop the truck to stock height and it sit level. I purchased a stock suspension locally on craigslist including 4 shocks, pitman arm, and 1.5" front leveling spacers. I forgot to ask if they came off an F250 or F350. Would the coils and shocks be different between those two models? I believe I have everything I need besides the stock rear blocks. I'm considering not running rear blocks or the front leveling spacer, but concerned my worn down 35" tires will rub even though my fender liners are trimmed. Any help or advice will be greatly appreciated. [ATTACH]38407._xfImport[/ATTACH] [/QUOTE]

Verification

Random media

1511MG-368

AD2_2_

Hay_hauler

15 to 17

523864e1

49879E51-01FB-4FF0-B0F2-F0EAEB74242D

ngauge_front

99.5 7.3

2008 King Ranch motor work

DNR_customs

hot_pipe_070612

Latest posts

0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- Today at 2:44 PM
Aftermarket Performance
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US

Members online

Total: 1,053 (members: 2, guests: 1,051)

Top